2024 Grip Guide

F. PIPSTRIPS ® INDIVIDUAL GRIP STRIPS

F

Maximum convenience – two-sided adhesive tape strips already cut to exact length and width needed for easy gripping of golf club. Each strip is 2" x 9". Each strip pack includes illustrated instructions for re-gripping and application. Tape activator solution sold separately below. INDIVIDUAL STRIP PACK Contains 15 double-coated adhesive strips. #KSTRIP15 $3.20/Pack INDIVIDUAL STRIP PACKS CASE Contains 100 packs with 15 double-coated

A

adhesive strips in each pack. #KSTRIPC $310.00/Case

A. QUICK SHAFT CLAMP Safely clamps any golf shaft for gripping. Thumb knob quickly and easily adjusts clamp pressure for use with lightweight graphite shafts. Comes with a bench mount bracket that can be removed, rotated 90 degrees, and reinstalled for use in a vise. #KGW0051 $100.00 Ea.

G

GRIP TAPE ACTIVATOR Activates two-sided tape for secure adhesion of slip-on grips. Allows for safe, quick and easy re-gripping; works with all tape.

Non-toxic, odorless and non-flammable. Available in three sizes (pump spray trigger for 1-qt. bottle is sold separately). G. #KSTRIPS (8 OZS.) $4.45 Ea.

I

#KEXTE (Use to extend steel, titanium or aluminum shafts.) $7.00 Ea. #KEXTEG (Use to extend graphite shafts.) $2.85 Ea. B. SHAFT EXTENDER Steel extension for lengthening clubs. Simply apply epoxy, slide into shaft butt, allow epoxy to cure, and cut to length. Available in .580 or .600 sizes to extend most shafts up to 4". Each extender has dual-reducer ends and will extend up to two clubs. B

H. #KSOLVG (1-GAL.) $26.50 Ea. #KSOLVQ (1-QT.) $9.45 Ea.

I. PUMP SPRAY TRIGGER For use with #KSOLVQ 1-qt. bottle. #KSOLVPS $1.90 Ea.

J

H

J. SHAFT-BONDING ADHESIVE High-strength epoxy bonds steel and graphite shafts to wood, iron or putter heads. Also tightens and bonds inserts and soleplates; mends generally anything around the shop. Convenient dispensing unit contains .85 ozs. each of activator and base. Full-cure and ready-to-use in 10 minutes. #KBOND $6.54 Ea.

C

C. TAPE REMOVER TOOL Contoured, hardened edge conforms to shaft butt end to strip away old tape and buildup. Made from hardened steel with easy-grip handle for smooth, clean and easy removal. #K24153 $39.80 Ea.

L

D. THE RHINO RIP ™

SHAFT CUTTER Durable tool with super-hardened wheel blade cuts steel, titanium and aluminum shafts. Has hardened rollers with flare-clearance grooves and built-in, slide-lock reamer. Gives clean tip trim cut every time ( 1 / 8 " to 1 1 / 8 " dia. capacity). Replacement cutter blade wheels sold separately (pkg. of two). K. #K120 (CUTTER) $11.35 Ea. L. #KPART6 (WHEELS) $4.25/Pkg. of 2

GRIP REMOVAL TOOL Safely removes all types of grips on steel or graphite shafts. Just align on grip, slice and remove. It’s the fastest, easiest and safest

grip removal tool available. With long-lasting replaceable blade and lifetime warranty on handle and shaft. Replacement blades sold separately (package of three). #KRIP $18.00 Ea. #KRIPBL (BLADES) $8.50/Pkg. of 3

D

(Not for use with graphite shafts.)

K

E

M. TWO-SIDED GRIP TAPE For fast and easy gripping of clubs. Simply wrap around shaft butt, apply solvent, and slip on grip. All sizes are two-sided.

M-1

M-2

M-3

M-4

E. VISE CLAMP Solid 3 3 / 4 " rubber clamp holds shaft securely without damaging or scratching. Essential for re-gripping, re-shafting and

3M ™ (1" x 36 Yds./Roll) Green/White L-1. #K400 $20.50/Roll (2" x 36 Yds./Roll) Green/White L-2. #K401 $40.60/Roll

ANCHOR ® (3/4" x 6 Yds./Roll) White L-3. #K500 $6.50/Roll (2" x 36 Yds./Roll) White L-4. #K501 $16.85/Roll

other club repairs. #KVISE $5.30 Ea.

– 9 –

www.hornungs.com